January 2013 - Ibr-dtn - lists.ibr.cs.tu-bs.de

Re: [ibr-dtn] Android Apps Neighbor Discovery
by justin＠gardettoengineering.com 04 Feb '13

04 Feb '13

2 1

Re: [ibr-dtn] Compiling ibrdtn on Eclipse
by Francisco Cuesta 04 Feb '13

04 Feb '13

Hello, I have a question concerning to how did you cross-compile ibtrdt suite for openwrt in a terminal first you configure ibrdtn project with ./configure indicating that the target was a mips processor and you passed as compiler the one in hte toolchain of OpenWRT, am I mistaken? Thanks in advance Regards, 2013/1/25 Francisco Cuesta <ndarkness(a)gmail.com> > Hi Johannes, > > Understood, concerning to the crosscompilation with eclipse I know how to > do it for my target, however the error when I try to crosscompile ibrdtn > project on eclipse is a reference one, since it always complains about the > path of some files inside the project which cannot be reached, that's to > say, it complains about the sentences include <ibrdtn/utils/Uitls.h> for > instance, because it cannot find the file (or the path I guess) and says > that such a file does not exist. May you tell me how how to reference the > project inside folders in order other subfolders can reach then avoiding > this reference problem? I tried to look it into the project settings (which > were downloaded too) but I couldn't find them. > > Thank you so much > > Kind regards > > Fran > > > 2013/1/24 Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> > >> Both. In a terminal using the OpenWRT toolchain. >> >> -------- Weitergeleitete Nachricht -------- >> Von: Francisco Cuesta <ndarkness(a)gmail.com> >> An: Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> >> Betreff: Re: [ibr-dtn] Compiling ibrdtn on Eclipse >> Datum: Thu, 24 Jan 2013 14:29:46 +0100 >> >> I see, then when you compiled the code forn Openwrt for instance, did >> you make it through a terminal or wiht openwrt toolchain?? >> >> >

2 2

Android Apps Neighbor Discovery
by justin＠gardettoengineering.com 30 Jan '13

30 Jan '13

2 1

Re: [ibr-dtn] Strange behavior sending bundles
by Johannes Morgenroth 29 Jan '13

29 Jan '13

Please send answers to the mailing list! Queuing a bundle for a transfer to the next-hop is only done if the next-hop node is available as neighbor. Further, this process is executed on several events. One such event is the generation of a bundle, another is the availability of a neighbor. In any cases routing in IBR-DTN is a reactive mechanism. There exists a queue but this is limited to several bundles for each neighbor and a FIFO without any ordering. If the queue is occupied, then no additional bundle gets queued. The retransmission mechanism handles the transmission back-off for each re-queued bundle. While a bundle is in the re-queuing mechanism it is still in the queue for the destination, but it is held back until the back-off is past. Re-queuing might happen under several circumstances. One of them is the failed connection to a neighbor which should be available. As told in some mails earlier, the priority is just an ordering in the bundle storage. It is NO guarantee that bundles will be delivered in the priority order. Further, you should not rely on bundle priorities for hard constrains, since the DTN architecture (RFC4838) just defines them as relative priorities which are limited to bundles of the same source EID (and same destination EID). -------- Weitergeleitete Nachricht -------- Von: Alex López <lopalex87(a)gmail.com> An: Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> Betreff: Re: [ibr-dtn] Strange behavior sending bundles Datum: Mon, 28 Jan 2013 16:21:19 +0100 What I do is to disable the wifi on the sender router and type the dtnsend commands. After this I enable the wifi (so the sender router sees the receiver router). By faking disconnection you mean this? When a bundle is queued for transmission? Right after typing the dtnsend command or when the sender router sees another node (or the destination one)? On the other hand, if a bundle is queued for transmission and the transmission fails you should not try to retransmit the same bundle again to maintain the sorted queue based in priority, instead of trying to retransmit the next bundle? You will lost the sorting if you do in this way.

2 1

Strange behavior sending bundles
by Alex López 28 Jan '13

28 Jan '13

Hello, I was doing some testing sending some files with the dtnsend and dtnreceiver tools and checking if the priority parameter works as intended when I found something weird in my results. My test consist in sending 5 files: 1, 2, 3, 4, 5. File 1 has high priority. Files 2, 3 and 4 have normal priority. File 5 has low priority. First of all, the router which sends the files cannot see the destination node, so the files (bundles) will be stored in this router. After all 5 bundles are stored in the router I connect it to the other router and start the dtnrecv program, so bundles are transmitted without problem. Everything seems fine, but after revising the logs I found some weird and it's that the receiver received the bundles in the following order: 4, 5, 1, 2 and 3. The logical order would be 1, 2, 3, 4, 5 so I redo the experiment and now the bundles were received in the following order: 2, 3, 4, 5 and 1, so something weird is happening. I check the ibrdtn.log of the *sending router*: *Fri Jan 25 14:21:34 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438174.57] dtn://node4.dtn/NwDuMTuXnISiKzS (File 1) Fri Jan 25 14:21:34 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438153.37] dtn://node4.dtn/OEAsZLmtkeeqIgy (File 2) Fri Jan 25 14:21:34 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438166.49] dtn://node4.dtn/WXGOOyJunVtAeiC (File 3) Fri Jan 25 14:21:34 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438169.53] dtn://node4.dtn/nQxCZKRvkbbpRXF (File 4) Fri Jan 25 14:21:34 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438177.61] dtn://node4.dtn/OMImpIWIFglHYcg* (File 5) Equivalences are: 412438174.57 -> File 1 412438153.37 -> File 2 412438166.49 -> File 3 412438169.53 -> File 4 412438177.61 -> File 5 Here you can see how the bundles are well stored following the priority parameter. Here is the log at the *receiver router*: *Fri Jan 25 14:21:33 2013 NOTICE: NodeEvent: Node dtn://node4.dtn available Fri Jan 25 14:21:46 2013 NOTICE: ConnectionEvent: connection up dtn://node4.dtn Fri Jan 25 14:21:46 2013 NOTICE: BundleReceivedEvent: Bundle received [412438169.53] dtn://node4.dtn/**nQxCZKRvkbbpRXF -> dtn://node2.dtn/filetransfer from dtn://node4.dtn (File 4) Fri Jan 25 14:21:46 2013 NOTICE: BundleReceivedEvent: Bundle received [412438177.61] dtn://node4.dtn/OMImpIWIFglHYcg -> dtn://node2.dtn/filetransfer from dtn://node4.dtn (File 5) Fri Jan 25 14:21:46 2013 NOTICE: BundleReceivedEvent: Bundle received [412438174.57] dtn://node4.dtn/NwDuMTuXnISiKzS -> dtn://node2.dtn/filetransfer from dtn://node4.dtn (File 1) Fri Jan 25 14:21:46 2013 NOTICE: BundleReceivedEvent: Bundle received [412438153.37] dtn://node4.dtn/OEAsZLmtkeeqIgy -> dtn://node2.dtn/filetransfer from dtn://node4.dtn (File 2) Fri Jan 25 14:21:48 2013 NOTICE: BundleReceivedEvent: Bundle received [412438166.49] dtn://node4.dtn/WXGOOyJunVtAeiC -> dtn://node2.dtn/filetransfer from dtn://node4.dtn (File 3) Fri Jan 25 14:23:48 2013 NOTICE: ConnectionEvent: connection down dtn://node4.dtn Fri Jan 25 14:29:57 2013 NOTICE: NodeEvent: Node dtn://node4.dtn unavailable * As you can see, the receiving order was 4, 5, 1, 2, 3 so the bundles are not send following my priority option. Trying to understand what was happening I researched further the sender log and I find something interesting: . . *. Fri Jan 25 14:21:36 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438174.57] dtn://node4.dtn/NwDuMTuXnISiKzS (File 1) Fri Jan 25 14:21:37 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438153.37] dtn://node4.dtn/OEAsZLmtkeeqIgy (File 2) Fri Jan 25 14:21:38 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438166.49] dtn://node4.dtn/WXGOOyJunVtAeiC (File 3) Fri Jan 25 14:21:39 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438169.53] dtn://node4.dtn/nQxCZKRvkbbpRXF (File 4) Fri Jan 25 14:21:40 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438177.61] dtn://node4.dtn/OMImpIWIFglHYcg (File 5) Fri Jan 25 14:21:41 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438174.57] dtn://node4.dtn/NwDuMTuXnISiKzS (File 1) Fri Jan 25 14:21:42 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438153.37] dtn://node4.dtn/OEAsZLmtkeeqIgy (File 2) Fri Jan 25 14:21:43 2013 NOTICE: RequeueBundleEvent: Bundle requeued [412438166.49] dtn://node4.dtn/WXGOOyJunVtAeiC (File 3) Fri Jan 25 14:21:47 2013 NOTICE: ConnectionEvent: connection up dtn://node2.dtn ---> I CONNECT DESTINATION ROUTER Fri Jan 25 14:21:47 2013 DEBUG.5: processing static routing task SearchNextBundleTask: dtn://node2.dtn Fri Jan 25 14:21:47 2013 DEBUG.5: processing neighbor routing task SearchNextBundleTask: dtn://node2.dtn Fri Jan 25 14:21:47 2013 DEBUG.5: got 5 items to transfer to dtn://node2.dtn Fri Jan 25 14:21:47 2013 NOTICE: TransferCompletedEvent: transfer of bundle [412438169.53] dtn://node4.dtn/nQxCZKRvkbbpRXF to dtn://node2.dtn completed (File 4) Fri Jan 25 14:21:47 2013 DEBUG.5: got 4 items to transfer to dtn://node2.dtn Fri Jan 25 14:21:47 2013 NOTICE: TransferCompletedEvent: transfer of bundle [412438177.61] dtn://node4.dtn/OMImpIWIFglHYcg to dtn://node2.dtn completed (File 5) Fri Jan 25 14:21:47 2013 DEBUG.5: processing neighbor routing task SearchNextBundleTask: dtn://node2.dtn Fri Jan 25 14:21:47 2013 DEBUG.5: got 3 items to transfer to dtn://node2.dtn Fri Jan 25 14:21:47 2013 NOTICE: TransferCompletedEvent: transfer of bundle [412438174.57] dtn://node4.dtn/NwDuMTuXnISiKzS to dtn://node2.dtn completed (File 1) . . .* As you can see here, it seems that the sender router is performing some "periodic checking" with the bundles it has stored when the destination router suddenly connected. When it's connected the sender sends the next bundle in his "periodic checking list" instead of sending the bundle which is the first in the queue and has the highest priority. It is working as intended or it's a bug? Thanks in advance -- Alex Lopez

2 1

Re: [ibr-dtn] Compiling ibrdtn on Eclipse
by Johannes Morgenroth 23 Jan '13

23 Jan '13

If the library ibrcommon isn't found by configure. Then it isn't installed right. What does this command say? $ pkg-config --libs ibrcommon To install the ibrcommon library call "make install" after compiling it. Kind regards, Johannes -------- Weitergeleitete Nachricht -------- Von: Francisco Cuesta <ndarkness(a)gmail.com> An: Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> Betreff: Re: [ibr-dtn] Compiling ibrdtn on Eclipse Datum: Wed, 23 Jan 2013 17:03:24 +0100 Thanks for replying to soon, Johannes. I've followed your steps and I've been able to compile ibrcommon, but I could not do the same with ibrdtn since when I reconfigure it( with the option reconfigure project) I was retreived this error ... checking pkg-config is at least version 0.9.0... yes checking for ibrcommon... no ibrcommon library not found! Configuration failed with error I have already installed from source following the script on the wiki, but even so I was given that error. Do I need to include the path of ibrcommon into ibrdtn project in eclipse? Thanks again regards

1 0

Re: [ibr-dtn] Compiling IBRDTN for OpenWRT
by Kurnikov Arseny 23 Jan '13

23 Jan '13

Hi Alex, I'll try to answer this, though I'm not the "official IBR-DTN developer":) The things got a bit confused here. > 1. We copy the options we passed to argv to the bundle b. (dtnsend.cpp) > 2. We send the bundle b to the client through "client << b" (dtnsend.cpp) Up till here it's fine. > 3. The client, who has done client.connect() before, has the _receiver.start() working. (client.cpp) Now this receiver is for receiving bundles, not for sending. So this part is involved in dtnrecv, not in dtnsend. The bundles got to the daemon through the BinaryStreamClient (ibrdtnd/src/api). In the connection function you'll notice this: _stream << "protocol tcpcl"; And in ClientHandler (ibrdtnd/src/api) you'll see the creation of the BinaryStreamClient when it receives "protocol tcpcl". This is the part of the daemon that notifies the daemon when the bundle is received from the client. Have a look at ApiServer::processIncomingBundle(). Now if we go back to receiving bundles: > 3. The client, who has done client.connect() before, has the _receiver.start() working. (client.cpp) > 4. I suppose, step 3 calls for the Client::AsyncReceiver::run(). (client.cpp) > 5. Now, the client sends the information to a variable and the client receive it with "_client >> b" and "_client.received(b)". (client.cpp) > 6. Finally, when the client receives the bundle it makes an "_inqueue.push(b)" to put it in the queue (client.cpp) This is valid for dtnrecv. Again the daemon part that actually gets the bundle from the storage would be BinaryStreamClient and AsyncReceiver is responsible of getting the bundle from BinaryStreamClient and putting it to _inqueue. > My questions are: > > - What kind of storage is that queue? The client should not store the bundles in the router using the MemoryStorageBundle.cpp or SimpleStorageBundle.cpp? This queue is a temporal queue before the bundles get delivered to the application. The storing happens in BinaryStreamClient. > - I've found that the dtnsend only sends the bundle to the client, but the client seems to work only with the queues. How the client interacts with the storage you have defined in the > conf file and where the priority sort should be done? So it goes through the stream connection and on the other end is BinaryStreamClient. The interaction with storage is on behalf of the daemon then (when it reacts to BundleReceivedEvent, for example, have a look at BaseRouter (ibrdtnd/src/routing)). > Thanks in advance. > > Alex López. You're welcome. I think this is correct. If not, guys, please fix. Regards, Arseny Kurnikov.

2 2

Re: [ibr-dtn] Compiling ibrdtn on Eclipse
by Johannes Morgenroth 23 Jan '13

23 Jan '13

The I do import the project to eclipse is: 1. New -> other 2. C/C++ -> Makefile Project with Existing Code -> Next 3. Enter name and code location 4. Select "GNU Autotools Toolchain" -> Finish As next you should do the steps described in the Wiki at least once at least. Then you can compile the code as other as you wish using the build command. Kind regards, Johannes Morgenroth -------- Weitergeleitete Nachricht -------- Von: Francisco Cuesta <ndarkness(a)gmail.com> An: Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> Betreff: Re: [ibr-dtn] Compiling ibrdtn on Eclipse Datum: Wed, 23 Jan 2013 13:31:18 +0100 Hi Johannes, Thanks for replying me, I was using eclipse but without autotools, now I have installed the plugin, but I would like to ensure that the way in which I import the project is the correct, so if you had a mininute to see whether I import the project in a correct way I will thank you. My procedure is the follwing 1 New>>C++ project 2 Project type>> GNU autotools>>empty project>> I set the name >> finish 3 IN the project I've just created>> import>>General>> file system >> and here select the ibrdtn folders( ibrdt, ibrcommons...) Is this a correct way of importing the project?? And what's more, once I have the project how can I compile it, should I use just autotools or I can still use "build project'? Thanks, I achieved to compile it without eclipse using that wiki, but my main goal is use Eclipse as development tool for compilinf and debuging there. Thanks again, Regards! 2013/1/23 Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> Hi. Please try the Eclipse IDE for C/C++ Developers Edition from here: http://www.eclipse.org/downloads/ And import the code as autotools project. Basic compilation without Eclipse is explained in the Trac-Wiki. http://www.ibr.cs.tu-bs.de/trac/ibr-dtn/wiki/source Kind regards, Johannes Morgenroth -------- Weitergeleitete Nachricht -------- Von: Francisco Cuesta <ndarkness(a)gmail.com> An: Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> Betreff: Re: [ibr-dtn] Compiling ibrdtn on Eclipse Datum: Tue, 22 Jan 2013 17:28:22 +0100 Hello, Yes I know that the best way to get a project is using import option, I did not know that ibrdt was done with autotools pluging though. On the other hand, I cannot understand now how to build the project for my machine(linux i868 arch) in order just to check whether the impromevents that I might make to the code generate errors or not.And I'm missing that since the "project settings" aren't available to be modified,so I asume that the only way to achieve it is through the autotools pluggin right? thanks in advance, regards 2013/1/22 Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> Hello. The path in your eclipse project depends on you specific system. Thus, it is not a solution to just copy the path settings from somebody else. The best way for you is to import the project as C++ autotools project. In this case eclipse will set the right default paths settings for you. Kind regards, Johannes Morgenroth -------- Weitergeleitete Nachricht -------- Von: Francisco Cuesta <ndarkness(a)gmail.com> An: ibr-dtn(a)ibr.cs.tu-bs.de Betreff: [ibr-dtn] Compiling ibrdtn on Eclipse Datum: Tue, 22 Jan 2013 10:46:12 +0100 So I would like to ask whether is possible to upload the library path import setting of the project, in order to avoid these reference errors which are driven me a lite bit crazy. -- !! This message is brought to you via the `ibr-dtn' mailing list. !! Please do not reply to this message to unsubscribe. To unsubscribe or adjust !! your settings, send a mail message to <ibr-dtn-request(a)ibr.cs.tu-bs.de> !! or look at https://www.ibr.cs.tu-bs.de/mailman/listinfo/ibr-dtn.

1 0

Re: [ibr-dtn] Compiling ibrdtn on Eclipse
by Johannes Morgenroth 23 Jan '13

23 Jan '13

Hi. Please try the Eclipse IDE for C/C++ Developers Edition from here: http://www.eclipse.org/downloads/ And import the code as autotools project. Basic compilation without Eclipse is explained in the Trac-Wiki. http://www.ibr.cs.tu-bs.de/trac/ibr-dtn/wiki/source Kind regards, Johannes Morgenroth -------- Weitergeleitete Nachricht -------- Von: Francisco Cuesta <ndarkness(a)gmail.com> An: Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> Betreff: Re: [ibr-dtn] Compiling ibrdtn on Eclipse Datum: Tue, 22 Jan 2013 17:28:22 +0100 Hello, Yes I know that the best way to get a project is using import option, I did not know that ibrdt was done with autotools pluging though. On the other hand, I cannot understand now how to build the project for my machine(linux i868 arch) in order just to check whether the impromevents that I might make to the code generate errors or not.And I'm missing that since the "project settings" aren't available to be modified,so I asume that the only way to achieve it is through the autotools pluggin right? thanks in advance, regards 2013/1/22 Johannes Morgenroth <morgenroth(a)ibr.cs.tu-bs.de> Hello. The path in your eclipse project depends on you specific system. Thus, it is not a solution to just copy the path settings from somebody else. The best way for you is to import the project as C++ autotools project. In this case eclipse will set the right default paths settings for you. Kind regards, Johannes Morgenroth -------- Weitergeleitete Nachricht -------- Von: Francisco Cuesta <ndarkness(a)gmail.com> An: ibr-dtn(a)ibr.cs.tu-bs.de Betreff: [ibr-dtn] Compiling ibrdtn on Eclipse Datum: Tue, 22 Jan 2013 10:46:12 +0100 So I would like to ask whether is possible to upload the library path import setting of the project, in order to avoid these reference errors which are driven me a lite bit crazy. -- !! This message is brought to you via the `ibr-dtn' mailing list. !! Please do not reply to this message to unsubscribe. To unsubscribe or adjust !! your settings, send a mail message to <ibr-dtn-request(a)ibr.cs.tu-bs.de> !! or look at https://www.ibr.cs.tu-bs.de/mailman/listinfo/ibr-dtn.

1 0

Compiling IBRDTN for OpenWRT
by Alex López 22 Jan '13

22 Jan '13

Hello, I'm trying to compile the 0.8.0v of ibrdtn, ibrdtnd, ibrdtn-tools and ibrcommon using the OpenWRT toolchain. Looking for accomplish this, some doubts came to my mind, could you help me please? 1.- I have found (and already installed and working) your ibrdtn packages from http://www.ibr.cs.tu-bs.de/projects/ibr-dtn/releases/openwrt/10.03.1/ar71xx/. This packages are compiled using the source code from http://www.ibr.cs.tu-bs.de/projects/ibr-dtn/releases/ ".tar.gz" files or are you using an specific code for OpenWRT? I'm asking this because I've found that your ibrdtn seems integrated with the OpenWRT config (using the UCI) and you have the /etc/init.d/ibrdtnd script already. 2.- As there are already .ipk packages for OpenWRT I was looking for the Makefile you used to compile them but I haven't found it. It's somewhere in the repository? Thank you in advance. Best Regards, Alex Lopez

2 2