- Ibr-dtn - lists.ibr.cs.tu-bs.de

ERROR IPNDAgent: join failed on eth0; 99: setsockopt()
by Adriano Galati 18 Nov '13

18 Nov '13

Hello, I have just installed ibr-dtn on openWRT. I execute dtnd in this way dtnd -c /tmp/ibrdtn.config but I get this ERROR ERROR IPNDAgent: join failed on eth0; 99: setsockopt() Does anybody know why? Any comment/help is very much appreciated. Thank you very much, Adriano In my config file net_lan0_interface = eth0 and my network configuration root@ALL0315N:~# ifconfig br-lan Link encap:Ethernet HWaddr 00:0F:C9:0B:34:09 inet addr:129.132.11.245 Bcast:129.132.11.255 Mask:255.255.255.192 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:977556 errors:0 dropped:202552 overruns:0 frame:0 TX packets:222313 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:158552701 (151.2 MiB) TX bytes:43248219 (41.2 MiB) eth0 Link encap:Ethernet HWaddr 00:0F:C9:0B:34:09 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:986264 errors:0 dropped:5893 overruns:0 frame:0 TX packets:222372 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:172968447 (164.9 MiB) TX bytes:43251389 (41.2 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:476 errors:0 dropped:0 overruns:0 frame:0 TX packets:476 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50216 (49.0 KiB) TX bytes:50216 (49.0 KiB) wlan0 Link encap:Ethernet HWaddr 00:0F:C9:0B:34:08 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:760419 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 B) TX bytes:142658599 (136.0 MiB) ------------------------------------------------------------------------------------------------------ root@ALL0315N:~# cat /etc/config/wireless config wifi-device 'radio0' option type 'mac80211' option macaddr '00:0f:c9:0b:34:09' option hwmode '11ng' list ht_capab 'SHORT-GI-40' list ht_capab 'TX-STBC' list ht_capab 'RX-STBC1' list ht_capab 'DSSS_CCK-40' option noscan '1' option country 'CH' option channel '1' option htmode 'HT40+' config wifi-device 'radio1' option type 'mac80211' option macaddr '00:0f:c9:0b:34:08' list ht_capab 'SHORT-GI-40' list ht_capab 'TX-STBC' list ht_capab 'RX-STBC1' list ht_capab 'DSSS_CCK-40' option country 'CH' option noscan '1' option channel '1' config wifi-iface option device 'radio1' option network 'lan' option key 'MOSAIC2B' option ssid 'MOSAIC2B1' option mode 'ap' option encryption 'none' ------------------------------------------------------------- root@ALL0315N:~# cat /etc/config/network config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' option ifname 'eth0 eth1' option type 'bridge' option _orig_ifname 'eth0 eth1 radio0.network1 wlan0' option _orig_bridge 'true' option proto 'dhcp' option hostname 'drz-mosaic2b1'

2 3

configuration file
by Adriano Galati 15 Nov '13

15 Nov '13

Hello, I am running ibrdtn on openWRT. It seems that when I launch dtnd -c /etc/config/ibrdtn it is not loading the configuration file "ibrdtn". I uncommented the hostname to be dtn://node,dtn but I get "dtn://ALL0315N" (see below). Any help please? Besides, where can I find "dtnd" documentation and which options to use and how? thank you very much in advance, best, Adriano root@ALL0315N:~# dtnd -c /etc/config/ibrdtn Fri Nov 15 12:22:04 2013 INFO Configuration: Configuration: /etc/config/ibrdtn Fri Nov 15 12:22:04 2013 INFO NativeDaemon: IBR-DTN daemon 0.10.2 (build 1d89427) Fri Nov 15 12:22:04 2013 INFO Configuration: Configuration: /etc/config/ibrdtn Fri Nov 15 12:22:04 2013 INFO BundleCore: Local node name: dtn://ALL0315N Fri Nov 15 12:22:04 2013 INFO BundleCore: Forwarding of bundles enabled. Fri Nov 15 12:22:04 2013 INFO NativeDaemon: using bundle storage in memory-only mode Fri Nov 15 12:22:04 2013 INFO NativeDaemon: API initialized using tcp socket: loopback:4550 Fri Nov 15 12:22:04 2013 INFO DiscoveryAgent: listen to [ff02::142]:4551 Fri Nov 15 12:22:04 2013 INFO DiscoveryAgent: listen to [224.0.0.142]:4551 Fri Nov 15 12:22:04 2013 INFO NativeDaemon: Using default routing extensions

1 0

Fragmentation
by Luís Carlos Guedes 13 Nov '13

13 Nov '13

Hello, Can you please tell me where can I see(in the code) the place where you did that configuration; "If A meets B again(for the 2nd time) the remaining fragment X' is forwarded. In case node A meets another peer, the complete bundle X is forwarded."Because in order to send information from A to B through 2 different nodes (and join them in the node B) i need to send through the second node just that X' and not the complete bundle as is already implemented. Besides that i wanted to know how do you implement in the code to join the information (from 2 or 3 fragmentations), to they become just one bundle like in the beginning. Thank you in advance,Luís Guedes

2 1

Android application : eterogeneous DTN implementations communications
by Mirco Nani 06 Nov '13

06 Nov '13

I am an italian student from "Alma Mater Studiorum Bologna" university and I am writing a DTN aware application for Android. I am trying to send bundles to another DTN implementation (DTN2.9) however i can't find a way to make visible the other implemetation to the IBR discovery protocols. Is there a way in IBR-DTN for android to address bundles by IP similarly to the "addLink" or "addConnection" command for the IBR Unix Deamon implementation? I am also trying to receive bundlers from DTN2.9 implementation so I'd like to know if there is some documentation on discovery protocols used by IBR-DTN deamon.

2 1

IBR-DTN release 0.10.2
by Johannes Morgenroth 29 Oct '13

29 Oct '13

Patch release 0.10.2 is available! This release is dedicated to fix bugs which could lead to segmentation faults or just behave the wrong way. The source is available via the project Trac. The packages for Debian, Raspbian and OpenWrt are currently in our build queue and should be available very soon. For a changes watch the official changelog: http://www.ibr.cs.tu-bs.de/trac/ibr-dtn/wiki/changelog Kind regards, Johannes Morgenroth

1 0

Android application : Broadcast receiver troubles
by Mirco Nani 28 Oct '13

28 Oct '13

I am an italian student from "Alma Mater Studiorum Bologna" university and I am writing a DTN aware application for Android. I am having troubles on receiving external intents from the IBR-DTN deamon. I followed the guide on http://trac.ibr.cs.tu-bs.de/project-cm-2012-ibrdtn/wiki/android-dev which says <receiver android:enabled="true" android:name=".service.EventReceiver" android:exported="true" android:permission="de.tubs.ibr.dtn.permission.DTN_SERVER"> <intent-filter> <action android:name="de.tubs.ibr.dtn.intent.STATE" /> <category android:name="android.intent.category.DEFAULT" /> </intent-filter> <intent-filter> <action android:name="de.tubs.ibr.dtn.intent.REGISTRATION" />  <category android:name="de.tubs.ibr.dtn.app" /> </intent-filter> <intent-filter> <action android:name="de.tubs.ibr.dtn.intent.RECEIVE" />  <category android:name="de.tubs.ibr.dtn.app" /> </intent-filter> </receiver> ando so I did: <receiver android:enabled="true" android:name=".DtnReceiver" android:exported="true" android:permission="de.tubs.ibr.dtn.permission.DTN_SERVER"> <intent-filter> <action android:name="de.tubs.ibr.dtn.intent.STATE" /> <category android:name="android.intent.category.DEFAULT" /> </intent-filter>  <intent-filter> <action android:name="de.tubs.ibr.dtn.intent.RECEIVE" /> <category android:name="com.mir.dtnawareapp" /> </intent-filter>  <intent-filter> <action android:name="de.tubs.ibr.dtn.intent.STATUS_REPORT" /> <category android:name="com.mir.dtnawareapp" /> </intent-filter> </receiver> the DtnReceiver is the broadcast receiver copy-pasted from DTNexampleApp and it's located in the com.mir.dtnawareapp package. The problem is tha the BroadcastReceiver (DtnReceiver) doesn't get triggered for incoming bundles. So I tried to modify the DTNexampleApp changing the package from de.tubs.ibr.dtn.ping to de.tubs.ibr.dtn.dtnawareapp but when i come to change <category android:name="de.tubs.ibr.dtn.ping" /> to <category android:name="de.tubs.ibr.dtn.dtnawareapp" /> the BroadcastReceiver just doesn't get triggered anymore. without changes it gets triggered, even with package name mismach (package name:de.tubs.ibr.dtn.dtnawareapp , category:de.tubs.ibr.dtn.ping ) I can't figure out where i'm going wrong, I know this is probably an Android related issue, but I didin't find enough documentation on custom categories for intent filters.

2 1

Android DTN Alerts
by Guilherme Rolim 24 Oct '13

24 Oct '13

Hello, Does the IBR-DTN Android API support a way to send an alert whenever a new neighbour enters? Thanks in advance, Guilherme

1 0

FW: IBR DTN on Android not receiving bundles
by Guilherme Rolim 22 Oct '13

22 Oct '13

From: grolim(a)outlook.com.br To: k.garlichs(a)tu-bs.de Subject: RE: [ibr-dtn] IBR DTN on Android not receiving bundles Date: Tue, 22 Oct 2013 17:08:31 -0200 Hello Keno, I've changed the lifetime of my bundles to 3600 seconds to test it, but the problem persisted. I have tested with another cellphone today and it worked fine, do you think maybe it's a incompatibility with this phone in particular? His version is older, 2.3.6. Thanks for the help,Guilherme Rolim Subject: Re: [ibr-dtn] IBR DTN on Android not receiving bundles From: k.garlichs(a)tu-bs.de Date: Tue, 22 Oct 2013 08:58:39 +0200 To: loxorolim(a)gmail.com; ibr-dtn(a)ibr.cs.tu-bs.de Hello Guilherme, the bundles have a specified time-to-live-attribute. If a bundle arrives after this time having been expired, it is rejected by the receiving node. This cannot only happen, if the bundle really is too old, but also if the clocks of the nodes differ too much. Did you check whether the clocks are set to the same time and date? If possible, you could just connect them to the internet for a few minutes so they can get the current time themselves via NTP. Kind regards, Keno Guilherme Rolim <loxorolim(a)gmail.com> schrieb: I just found that the bundles are being received, however, they are being rejected, the logcat shows they have been expired. That's strange because that didn't occur in the other cellphone =/. Thanks again,Guilherme Rolim On Mon, Oct 21, 2013 at 2:55 PM, Guilherme Rolim <loxorolim(a)gmail.com> wrote: Hello, I am creating na application that uses IBR-DTN and testing using 2 cellphones. However, though both cellphones have installed the exact same application, when I click to send the DTN packet only one manages to receive. For example, cellphone A sends dtn packet to B and B receives, when B sends a packet to A, A doesn't receive. I've checked that A and B really send their packages, the problem seems to be on the reception. Does anyone know what might be causing it? Thanks in advance,Guilherme Rolim -- !! This message is brought to you via the `ibr-dtn' mailing list. !! Please do not reply to this message to unsubscribe. To unsubscribe or adjust !! your settings, send a mail message to <ibr-dtn-request(a)ibr.cs.tu-bs.de> !! or look at https://www.ibr.cs.tu-bs.de/mailman/listinfo/ibr-dtn.

1 0

IBR DTN on Android not receiving bundles
by Guilherme Rolim 22 Oct '13

22 Oct '13

Hello, I am creating na application that uses IBR-DTN and testing using 2 cellphones. However, though both cellphones have installed the exact same application, when I click to send the DTN packet only one manages to receive. For example, cellphone A sends dtn packet to B and B receives, when B sends a packet to A, A doesn't receive. I've checked that A and B really send their packages, the problem seems to be on the reception. Does anyone know what might be causing it? Thanks in advance, Guilherme Rolim

2 2

Re: [ibr-dtn] Possible source error installing IBR-DTN on OpenWRT routers
by Johannes Morgenroth 08 Oct '13

08 Oct '13

Hello Brian, libel is not required by the daemon. Thus, I assume something else went wrong here. For a better understanding what is wrong with your system, please provide the output to these commands: $ uname -a $ ldd dtnd $ cat /etc/opkg.conf $ cat /etc/openwrt_release Kind regards, Johannes Am 08.10.2013 01:21, schrieb Brian De Leon Santiago: > Hello everyone, > > The objective of this message is report an possible source error > installing IBR-DTN on Open WRT router. > > I was trying to install IBR-DTN on my OpenWRT router. Logged in as ssh > from my laptop that is Ubuntu to the router I followed the > instructions available here > http://trac.ibr.cs.tu-bs.de/project-cm-2012-ibrdtn/wiki/download#OpenWRTrep… > ( I am using backfire 10.03.1 ar71xx) after installing the software I > tried start daemon typing dtnd, but I got an error: dtnd" can't load > library 'libel.so.1'. I don't now how to resolve this problem neither > other way to star daemon. I am installing this software on my router > because I also have two cell phones with IBR-dtn and some applications > such as whisper, my objective is to use the router as a new node in > order to store the messages in an hard drive connected to the router > and then the router will deliver the message to the other phone. If > anyone now how to resolve this problem please share the solution with me. > > Best regards > > -Brian De Leon

1 0