Hi Matheus,

I'm replying public to the IBR-DTN-list since there are many other people reading and might have an idea, too. Thus, I also attached the files, too.

Can you draw an (ASCII-Art) image of the setup (network interfaces, ...) of what you are trying to do, please?

In the mail you said, you are using wlan0 for communication, but in the config, you defined wlan1 as the device, where you can reach the API. This means, that tools like dtnsend can connect to the deamon via this interface. If I get it right, there are no convergence layers defined in your config, which are needed for communication between the nodes.

How are the Raspberry and BeagleBone connected to each other, via Ethernet or WLAN?

Best regards, Stephan

On Fr, 2015-07-17 at 13:39 -0300, MATHEUS CARMO OLIVEIRA wrote:

Thanks for answering! The corresponding configuration file log of the previous email is ibrconf.

I tested again using the default setting when installing the program, the ibrdtnd_default.conf. The corresponding log is ibrdtn_default.log. Attached are also the interfaces settings.

I would like to stress that I am only interested in connecting a Raspberry Pi to others who are running the daemon to measure protocols performances, be a BEAGLEBONE or Raspberry well. Oh yeah, I'm using hostapd Program wlan0 interface. This affects something?

(Code attached).

2015-07-17 12:44 GMT-03:00 Stephan Rottmann rottmann@ibr.cs.tu-bs.de: Hi Matheus,

    can you please attach your configuration file?

    Best regards to Manaus,
    Stephan

    Am Freitag, den 17.07.2015, 11:46 -0300 schrieb MATHEUS CARMO
    OLIVEIRA:
    > Hello guys! I'm a graduate student in Computer Science from
    the
    > Federal University of Amazonas. Sorry my English, because
    I'm trying
    > to translate in parallel with Google Translate. Anyway, I'm
    on a
    > research project on DTN, and I'm interested in using the
    IBR-DTN to
    > assist me in the search. I'm using IBR-DTN program Raspberry
    Pi and
    > BEAGLEBONE, both with Raspbian. It generates the output
    below:
    >
    >
    > Thu Jul 16 16:43:13 2015 INFO NativeDaemon: IBR-DTN daemon
    1.0.1-433
    > (build 916f576)
    > Thu Jul 16 16:43:13 2015 INFO Configuration: Configuration:
    ibrconf
    > Thu Jul 16 16:43:13 2015 INFO NativeDaemon: use logfile for
    > output: /home/pi/ibrdtn.log
    > Thu Jul 16 16:43:13 2015 INFO NativeDaemon: Parallel event
    processing
    > enabled using 4 processes.
    > Thu Jul 16 16:43:13 2015 INFO BundleCore: Local node name:
    > dtn://node1.dtn
    > Thu Jul 16 16:43:13 2015 INFO BundleCore: Forwarding of
    bundles
    > enabled.
    > Thu Jul 16 16:43:13 2015 NOTICE GlobalEvent: Internet
    connection is
    > available.
    > Thu Jul 16 16:43:13 2015 INFO SecurityKeyManager:
    initialized;
    > path: /etc/ibrdtn/bpsec
    > Thu Jul 16 16:43:13 2015 INFO NativeDaemon: using bundle
    storage in
    > memory-only mode
    > Thu Jul 16 16:43:13 2015 INFO NativeDaemon: API initialized
    using unix
    > domain socket: /tmp/ibrdtn.sock
    > Thu Jul 16 16:43:13 2015 INFO DiscoveryAgent: listen to
    > [224.0.0.142]:4551
    > Thu Jul 16 16:43:13 2015 INFO DiscoveryAgent: listen to
    > [ff02::142]:4551
    > Thu Jul 16 16:43:13 2015 INFO DHTNameService: DHT
    initialized on Port:
    > 36803 with ID:
    > Thu Jul 16 16:43:13 2015 ERROR IPNDAgent: failed to set-up
    multicast
    > socket on <any>:4551: 97: cannot create socket
    > Thu Jul 16 16:43:13 2015 INFO NativeDaemon: Using default
    routing
    > extensions
    > Thu Jul 16 16:43:14 2015 WARNING DHTNameService:
    bootstrapping from

    > domain dtndht.ibr.cs.tu-bs.de failed with error: -2
    > Thu Jul 16 16:43:15 2015 INFO DHTNameService: DHT shut down
    > Thu Jul 16 16:43:15 2015 NOTICE GlobalEvent: Shutdown
    initiated.
    >
    >
    >
    >
    > The message "Daemon is ready" never appears. Can you help me
    with
    > this!
    >
    >
    > Greetings !!