Hello
In my Raspberry Pi command line (via SSH), when I execute dtnd -i eth0, the console gets stuck to: "INFO NativeDaemon: Using default routing extensions"
It does not proceed to the messages from "INFO DTNEngine: Forwarding of bundles enabled." to "INFO DTNEngine: daemon ready" I had to open another terminal to try to execute other commands to the Raspberry Pi. Also, when I execute dtnping to other devices, I still get a timeout.
What could be the problem in the Raspberry Pi? Thanks.
Dom
Also, while this happens, my Android phone can detect the Raspberry Pi as a peer.
On Thu, Sep 29, 2016 at 7:09 PM, Dominic Solpico 4.0.gigadertz@gmail.com wrote:
Hello
In my Raspberry Pi command line (via SSH), when I execute dtnd -i eth0, the console gets stuck to: "INFO NativeDaemon: Using default routing extensions"
It does not proceed to the messages from "INFO DTNEngine: Forwarding of bundles enabled." to "INFO DTNEngine: daemon ready" I had to open another terminal to try to execute other commands to the Raspberry Pi. Also, when I execute dtnping to other devices, I still get a timeout.
What could be the problem in the Raspberry Pi? Thanks.
Dom
Hi,
can you attach the config files you are using?
Stephan
Am Donnerstag, den 29.09.2016, 20:26 +0800 schrieb Dominic Solpico:
Also, while this happens, my Android phone can detect the Raspberry Pi as a peer.
On Thu, Sep 29, 2016 at 7:09 PM, Dominic Solpico 4.0.gigadertz@gmail.com wrote: Hello
In my Raspberry Pi command line (via SSH), when I execute dtnd -i eth0, the console gets stuck to: "INFO NativeDaemon: Using default routing extensions" It does not proceed to the messages from "INFO DTNEngine: Forwarding of bundles enabled." to "INFO DTNEngine: daemon ready" I had to open another terminal to try to execute other commands to the Raspberry Pi. Also, when I execute dtnping to other devices, I still get a timeout. What could be the problem in the Raspberry Pi? Thanks. Dom
Hi Stephan,
Here is the config file. Sorry for sending it late because I was away from my Pi when I got your message. Also, when I cancel the "dtnd -i eth0" command, the Android phone stops discovering the Pi as peer.
On Thu, Sep 29, 2016 at 10:37 PM, Stephan Rottmann <rottmann@ibr.cs.tu-bs.de
wrote:
Hi,
can you attach the config files you are using?
Stephan
Am Donnerstag, den 29.09.2016, 20:26 +0800 schrieb Dominic Solpico:
Also, while this happens, my Android phone can detect the Raspberry Pi as a peer.
On Thu, Sep 29, 2016 at 7:09 PM, Dominic Solpico 4.0.gigadertz@gmail.com wrote: Hello
In my Raspberry Pi command line (via SSH), when I execute dtnd -i eth0, the console gets stuck to: "INFO NativeDaemon: Using default routing extensions" It does not proceed to the messages from "INFO DTNEngine: Forwarding of bundles enabled." to "INFO DTNEngine: daemon ready" I had to open another terminal to try to execute other commands to the Raspberry Pi. Also, when I execute dtnping to other devices, I still get a timeout. What could be the problem in the Raspberry Pi? Thanks. Dom-- Stephan Rottmann Institut für Betriebssysteme und Rechnerverbund Tel.: +49-531-391-3154 Mühlenpfordtstraße 23 Fax.: +49-531-391-5936 TU Braunschweig D-38106 Braunschweig
Hello,
Regarding this issue, I did not change anything in the configuration file when I installed IBR-DTN in my Raspberry Pi. I also looked at the /var/log/ibrdtn/ibrdtn.log and most of it contains the line: " WARNING DHTNameService: bootstrapping from default domain failed with error: -2"
On Fri, Sep 30, 2016 at 11:20 AM, Dominic Solpico 4.0.gigadertz@gmail.com wrote:
Hi Stephan,
Here is the config file. Sorry for sending it late because I was away from my Pi when I got your message. Also, when I cancel the "dtnd -i eth0" command, the Android phone stops discovering the Pi as peer.
On Thu, Sep 29, 2016 at 10:37 PM, Stephan Rottmann < rottmann@ibr.cs.tu-bs.de> wrote:
Hi,
can you attach the config files you are using?
Stephan
Am Donnerstag, den 29.09.2016, 20:26 +0800 schrieb Dominic Solpico:
Also, while this happens, my Android phone can detect the Raspberry Pi as a peer.
On Thu, Sep 29, 2016 at 7:09 PM, Dominic Solpico 4.0.gigadertz@gmail.com wrote: Hello
In my Raspberry Pi command line (via SSH), when I execute dtnd -i eth0, the console gets stuck to: "INFO NativeDaemon: Using default routing extensions" It does not proceed to the messages from "INFO DTNEngine: Forwarding of bundles enabled." to "INFO DTNEngine: daemon ready" I had to open another terminal to try to execute other commands to the Raspberry Pi. Also, when I execute dtnping to other devices, I still get a timeout. What could be the problem in the Raspberry Pi? Thanks. Dom-- Stephan Rottmann Institut für Betriebssysteme und Rechnerverbund Tel.: +49-531-391-3154 Mühlenpfordtstraße 23 Fax.: +49-531-391-5936 TU Braunschweig D-38106 Braunschweig
participants (2)
-
Dominic Solpico -
Stephan Rottmann