- Ibr-dtn - lists.ibr.cs.tu-bs.de

Re: [ibr-dtn] How to view content of the bundles at the receiver
by Sebastian Schildt 27 Jan '11

27 Jan '11

Hello, you got the node names wrong. See below: parneha(a)umd.edu hat am 26. Januar 2011 um 17:24 geschrieben: > Hi, > > This is my setup: > > sender has local eid: dtn://ibrdtnnode1.dtn > receiver has local eid: dtn://ibrdtnnode2.dtn > dtnsend command I am using: > dtnsend dtn://ibrdtnnode2/mytest /home/hyongla/hello you are sending to the node "ibrdtnnode2" > > dtnrecv command I am using : > dtnrecv --name mytest --file /home/user/test > > sender daemon output is: > > Wed Jan 26 11:03:29 2011 NOTICE: BundleReceivedEvent: Bundle > received [349373000.11] dtn://ibrdtnnode1.dtn/filetransfer -> > dtn://ibrdtnnode2/mytest > Wed Jan 26 11:03:29 2011 NOTICE: BundleEvent: bundle > [349373000.11] dtn://ibrdtnnode1.dtn/filetransfer received > Wed Jan 26 11:03:29 2011 NOTICE: TransferCompletedEvent: > transfer of bundle [349373000.11] > dtn://ibrdtnnode1.dtn/filetransfer to dtn://ibrdtnnode2.dtn > completed The bundle is transferred to the node "ibrdtnnode2.dtn". This either happens because you use epidemic routing, or you have a static route which will transfer bundles to "ibrdtnnode2.dtn". However "ibrdtnnode2" != "ibrdtnnode2.dtn", therefore "ibrdtnnode2.dtn" is not the final destination for the bundle destined to "ibrdtnnode2" and thus a dtnrecv on ibrdtnnode2.dtn will not get this bundle. Sending to the correct EID should work: dtnsend dtn://ibrdtnnode2.dtn/mytest /home/hyongla/hello > > Neha Paranjape > Graduate Student(Telecommunications) > University of Maryland,College Park Sebastian

1 0

Re: [ibr-dtn] How to view content of the bundles at the receiver
by Sebastian Schildt 26 Jan '11

26 Jan '11

Hello, It should work. Can you copy the dtnsend and dtnrecv commands you use and the output form BOTH daemons (sender and receiver) and post them to this list? Also, is dtnping working? MfG Sebastian parneha(a)umd.edu hat am 25. Januar 2011 um 20:55 geschrieben: > Hi, > > I was not successful in displaying the bundle contents using > dtnrecv even after following your instructions.I get this > message in the terminal > waiting for incoming bundle.. > and there is no activity after that.There is no data written to > the file I specify with dtnrecv. > > What must be the issue? > > Neha Paranjape > Graduate Student(Telecommunications) > University of Maryland,College Park

1 0

How to view content of the bundles at the receiver
by parneha＠umd.edu 25 Jan '11

25 Jan '11

Hi, I think I am successful in sending a bundle across to the destination.I see the following events happening: 1.bundle received 2.queue bundle event 3.bundle event 4.transfercompleted event 5.bundle event:bundle forwarded I want to see the content of the bundles at the receiver.I can see them queued in the following directory /var/spool/ibrdtn/bundles which is set in my ibrdtn.conf.example file. Is it possible to do so using dtnrecv?I have tried doing it and I get the following message Waiting for incoming data... Thanks and regards Neha Paranjape Graduate Student(Telecommunications) University of Maryland,College Park

2 1

Problem using dtnsend command
by parneha＠umd.edu 23 Jan '11

23 Jan '11

Hi, I am having problems using the dtnsend command. This is what I have done so far: 1.I have two laptops talking to each other with IBR-DTN daemon's running. 2.I am using static routing between them and have configured it in the ibrdtn.conf.example file for both of them. 3.On one of the laptop's,I issue the dtnsend command and try to transfer a file. 4.I get a message saying 'X' bytes sent. 5.When I check whether it has arrived at the second laptop using the dtnrecv command,I dont see it. 6.On the first laptop(the source),I see that the bundle is stored in the /var/spool/ibrdtn/bundles directory. I would like to know what is going on behind all this.If the source is saying that it has sent 'X' bytes then why does the destination not see it?.Can someone please help me understand this and suggest how to fix this problem? Neha Paranjape Graduate Student(Telecommunications) University of Maryland,College Park

1 0

iPhone app
by Harsha Chenji 20 Jan '11

20 Jan '11

Hello all, I am trying to write a bundle/dtn app for iphone...does anyone know if any good libraries exist that I can use? Harsha

1 0

dtnping between openwrt and PC
by Harsha Chenji 13 Jan '11

13 Jan '11

Has anyone tried to dtnping a router running OpenWRT and IBR-DTN from a regular PC running linux? I cannot seem to get replies. Harsha

2 2

How to send and receive bundles on IBR-DTN?
by parneha＠umd.edu 11 Jan '11

11 Jan '11

Hi, I have just installed IBR-DTN 0.4.4.How do I send and receive bundles?How do I modify the config file?Is there any documentation for this like the DTN2 manual with all commands and other info? I really need help with this.I have no idea how to proceed. Thanks Neha Paranjape Graduate Student(Telecommunications) University of Maryland,College Park

2 1

HELP: about multi-path ibr-dtn routing
by Ricardo Bangueses 05 Jan '11

05 Jan '11

Hello, We're trying to implement a ibr-dtn gateway so that it can send bundles to two other routers. Basically there's a gateway A, which has two paths to the same destination B, one is a direct link A-to-B, and the other one has another router C in between, A-C-B (all ibr-dtn). We edited the file ibrdtn.conf like this: (openWRT configuration file) config 'static-route' list pattern dtn://* option destination dtn://B option destination dtn://C The routing strategy is default, and the forwarding option is yes. Is this configuration correct, and if so, can you tell us where we might have not configured it right? We also tried without static route but it did not work. Is it possible to, without static routes but with the neighbours being discovered, forward bundles to these rediscovered neighbours? Thank you for your time, rjbangueses.

2 1

IBR-DTN release 0.4.4
by Johannes Morgenroth 29 Nov '10

29 Nov '10

Hi. We got a new release of IBR-DTN! This release solves a critical bug in the socket handling procedures. Everybody is encouraged to upgrade. ChangeLog: - AgeBlock support and bundle age tracking (similar to draft-irtf-dtnrg-bundle-age-block-01, but with seconds instead of microseconds as implemented by Calvin Ardi) - Bugfix for spontaneous broken filedescriptors For more information visit this page: http://www.ibr.cs.tu-bs.de/projects/ibr-dtn/ Regards, Johannes -- Johannes Morgenroth Institut fuer Betriebssysteme und Rechnerverbund Tel.: +49-531-391-3249 Muehlenpfordtstrasse 23 Fax.: +49-531-391-5936 TU Braunschweig D-38106 Braunschweig

1 0

IBR-DTN release 0.4.3
by Johannes Morgenroth 15 Nov '10

15 Nov '10

Hi. We got a new release of IBR-DTN! ChangeLog: - Use Netlink Library for interface to address resolving - Epidemic routing improved - Friendly error messages in tools - Improved dtnping with reply and timeout checking - TCP convergence layer reconnect after a connection failure - Help output for daemon added - TCP tuning options added (segment size & nodelay) - Improved API and TCPCL connections - API support unix domain sockets - Added flooding as routing option - Purge vector exchange added to epidemic routing - DNS resolving for names of static tcp connections - IPv6 support for outgoing TCP connections - Fixed deletion of non-existing file in the storage caused a crash - Improved flow control and error correction in epidemic routing - Discovery timeout is configurable now (discovery_timeout) For more information visit this page: http://www.ibr.cs.tu-bs.de/projects/ibr-dtn/ Regards, Johannes -- Johannes Morgenroth Institut fuer Betriebssysteme und Rechnerverbund Tel.: +49-531-391-3249 Muehlenpfordtstrasse 23 Fax.: +49-531-391-5936 TU Braunschweig D-38106 Braunschweig

1 0