Libsmi June 2003

libsmi@ibr.cs.tu-bs.de

10 participants
13 discussions

XSD min & max length
by Steve Bucknam 02 Jul '03

02 Jul '03

The following definition: DateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" STATUS current DESCRIPTION "A date-time specification. For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present." SYNTAX OCTET STRING (SIZE (8 | 11)) Gets converted to: <xsd:simpleType name="DateAndTime"> <xsd:annotation> <xsd:documentation> A date-time specification. For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present. </xsd:documentation> <xsd:appinfo> <displayHint>2d-1d-1d,1d:1d:1d.1d,1a1d:1d</displayHint> </xsd:appinfo> </xsd:annotation> <xsd:restriction base="xsd:string"> <xsd:pattern value="((0|[1-9](([0-9]){0,4}))-(0|[1-9](([0-9]){0,2}))-(0|[1-9](([0-9]) {0,2})),(0|[1-9](([0-9]){0,2})):(0|[1-9](([0-9]){0,2})):(0|[1-9](([0-9]) {0,2})).(0|[1-9](([0-9]){0,2})))|((0|[1-9](([0-9]){0,4}))-(0|[1-9](([0-9 ]){0,2}))-(0|[1-9](([0-9]){0,2})),(0|[1-9](([0-9]){0,2})):(0|[1-9](([0-9 ]){0,2})):(0|[1-9](([0-9]){0,2})).(0|[1-9](([0-9]){0,2})),((\p{IsBasicLa tin}){1})(0|[1-9](([0-9]){0,2})):((0|[1-9](([0-9]){0,2})))"/> <xsd:minLength value="8"/> <xsd:maxLength value="8"/> </xsd:restriction> </xsd:simpleType> The display hint shows the value is 11 chars long. The minLength and maxLength fields are both set to "8". There really should be two min and max length restrictions (8 and 11). What happens if there are more? Steve

2 1

RE: [libsmi] Compilation Errors
by Balasubramanian Pitchandi 20 Jun '03

20 Jun '03

Sorry to resend this message again. I am really stuck at this point with these errors. mailbody:128: [1] {other} syntax error, unexpected LOWERCASE_IDENTIFIER, expecting OBJECT mailbody:129: [5] {} warning: flushing recent incorrect declaration, see previous error(s) mailbody:339: [0] {} the SPPI construct/keyword `MAX-ACCESS' may not be used in a MIB The MIB is attached. Any help is appreciated. Thanks, Bala -----Original Message----- From: Balasubramanian Pitchandi [mailto:bs@utstar.com] Sent: Thursday, June 12, 2003 11:42 AM To: 'Ashok Kumar [ GVG DDF ]' Cc: 'libsmi(a)ibr.cs.tu-bs.de' Subject: RE: [libsmi] Compilation Errors Hello Ashok, Thanks for your response. The MIB is attached herewith for your reference. -- Bala -----Original Message----- From: Ashok Kumar [ GVG DDF ] [mailto:ashok.kumar@celstream.com] Sent: Thursday, June 12, 2003 1:43 AM To: 'bs(a)utstar.com' Subject: RE: [libsmi] Compilation Errors hello Bala, I think there is some asn1 syntax error in your mib file, are u using MAX-ACCESS for all the attributes? Is it possible to send me the mib file so that it will help me pointing out the error in u r mib file. ~ashok -----Original Message----- From: Balasubramanian Pitchandi [mailto:bs@utstar.com] Sent: Thursday, June 12, 2003 4:35 AM To: libsmi(a)ibr.cs.tu-bs.de Subject: [libsmi] Compilation Errors Hello, I am using the Mail Service to compile a MIB that I am writing and its giving me the following errors, which I am unable to understand what they mean: mailbody:128: [1] {other} syntax error, unexpected LOWERCASE_IDENTIFIER, expecting OBJECT mailbody:129: [5] {} warning: flushing recent incorrect declaration, see previous error(s) mailbody:339: [0] {} the SPPI construct/keyword `MAX-ACCESS' may not be used in a MIB Any help on finding out what these errors mean would be highly appreciated. Thanks, Bala ______________________ Bala Pitchandi UTStarcom Inc.

2 2

libsmi for win32
by Juergen Schoenwaelder 18 Jun '03

18 Jun '03

I compiled Win32 executables from the current CVS version using mingw and I have packaged everything into a zip archive: http://www.ibr.cs.tu-bs.de/~schoenw/libsmi-mingw.zip Ignorant as I am, the installation assumes that you unpack it under C: (I guess the Windows term for this is `drive' but I am not even sure). If this works for you, be happy. If you have a question, better ask your mother since she probably knows more about Windows than I do. ;-) /js

1 0

Unsigned64 Errors
by Rajbal Balan 17 Jun '03

17 Jun '03

Hi, I just inherited some scripts which use the SMI tools (smilint, smidump) and am pretty new to this. So if this question is basic, pl excuse me; I have already searched the archives ... When checking a set MIB modules using smilint, I get the following errors- [...snip...] nortelPC-standardTextualConventionsV1_CC0066B.mib:42: [1] {} type `Gauge32' may only be defined in SMI/SPPI base modules nortelPC-standardTextualConventionsV1_CC0066B.mib:43: [1] {} type `Counter32' may only be defined in SMI/SPPI base modules nortelPC-standardTextualConventionsV1_CC0066B.mib:44: [1] {} type `Unsigned32' may only be defined in SMI/SPPI base modules nortelPC-standardTextualConventionsV1_CC0066B.mib:45: [1] {} type `Integer32' may only be defined in SMI/SPPI base modules nortelPC-textualConventionsV1_CC0066B.mib:57: [1] {} type `Unsigned64' may only be defined in SMI/SPPI base modules nortelPC-textualConventionsV1_CC0066B.mib:194: [2] {enum-zero} number enumeration contains zero value in SMIv1 MIB nortelPC-frameRelayUniV1_CC0066B.mib:36: [0] {} the SPPI construct/keyword `Unsigned64' may not be used in a MIB [end] How do I define/setup a base module (since that seems to be core of the problem)? Is there anything else I am missing? Thanks, - Raj. -- ---------1---------2---------3---------4---------5---------6---------7-------- - Rajbal Balan Vnet : 965-6711 Software Engineer EMail : rajbal.balan(a)mci.com SNM Team

2 2

RE: [libsmi] Unloading modules
by HOOD, Andy 16 Jun '03

16 Jun '03

> -----Original Message----- > From: Juergen Schoenwaelder > > >>>>> winston writes: > > winston> Mmm not really what I want. The user just selects the MIB > winston> files he wants to load, I don't know those files in advance > winston> so I can't do the mapping. > > Then forget it unless you want to build some hyper magic artificial > intelligence search engine. In C, if I #include a file, then a file > with that name has to exist. In java, if I import a class, then the > appropriate file has to be exist somewhere. If people put stuff into > ugly places, then they get what they ask for. > > winston> Btw, besides filenames without extensions on win32 does > winston> libsmi recognize other MIB extensions for autoload? Like : > winston> .my, .mib, etc. > > It recognizes a few of them already I think. Try it and look at the > source code. ;-) > net-snmp tries to generate an index in each directory mapping MIB names to the file name containing them. Any reason why libsmi can't do the same thing? Regards, Andrew Hood A distributed system is one in which the failure of a computer you didn't even know existed can render your own computer unusable. -- Leslie Lamport, as quoted in CACM, June 1992

3 2

Re: [libsmi] smilib crash
by winston 16 Jun '03

16 Jun '03

Hi > Hi! > > I got the MIBs but there are still things missing to reconstruct > your problem (imported MIBs, compilable code). > > Since you mentioned that the order of loading the modules influences > the results: Be sure that all imported modules can actually be > imported (and don't contain any errors (check with smilint)). I > strongly suggest to name the files according to the module names! That's what I did in the end and it works now. Thanks for you help. soso > > -frank > ______________________________________________________________________ Do you want a free e-mail for life ? Get it at http://www.email.ro/

1 0

Re: [libsmi] Unloading modules
by winston 16 Jun '03

16 Jun '03

> So what you are really looking for is a mapping from module names to > file names. On my preferred platform, this mapping is a symbolic link > but I understand that this might not work in all places. So someone > has to write a piece of code so that libsmi can load such mappings > from the configuration file and use them while search for modules. Mmm not really what I want. The user just selects the MIB files he wants to load, I don't know those files in advance so I can't do the mapping. But I'm becoming evil and I'll change the filenames as they are loaded :D. Btw, besides filenames without extensions on win32 does libsmi recognize other MIB extensions for autoload? Like : .my, .mib, etc. > I think this is a good project for someone who wants to learn more > about the libsmi internals. ;-) The autoload for the above standard extensions would be a much more interesting/needed project (well, needed for me), if not done already :). > /js > -- > !! This message is brought to you via the `libsmi' mailing list. > !! Please do not reply to this message to unsubscribe. To unsubscribe or adjust > !! your settings, send a mail message to <libsmi-request(a)ibr.cs.tu-bs.de> > !! or look at https://www.ibr.cs.tu-bs.de/mailman/listinfo/libsmi. > ______________________________________________________________________ Do you want a free e-mail for life ? Get it at http://www.email.ro/

3 2

RE: [libsmi] Compilation Errors
by Balasubramanian Pitchandi 12 Jun '03

12 Jun '03

Hello Ashok, Thanks for your response. The MIB is attached herewith for your reference. -- Bala -----Original Message----- From: Ashok Kumar [ GVG DDF ] [mailto:ashok.kumar@celstream.com] Sent: Thursday, June 12, 2003 1:43 AM To: 'bs(a)utstar.com' Subject: RE: [libsmi] Compilation Errors hello Bala, I think there is some asn1 syntax error in your mib file, are u using MAX-ACCESS for all the attributes? Is it possible to send me the mib file so that it will help me pointing out the error in u r mib file. ~ashok -----Original Message----- From: Balasubramanian Pitchandi [mailto:bs@utstar.com] Sent: Thursday, June 12, 2003 4:35 AM To: libsmi(a)ibr.cs.tu-bs.de Subject: [libsmi] Compilation Errors Hello, I am using the Mail Service to compile a MIB that I am writing and its giving me the following errors, which I am unable to understand what they mean: mailbody:128: [1] {other} syntax error, unexpected LOWERCASE_IDENTIFIER, expecting OBJECT mailbody:129: [5] {} warning: flushing recent incorrect declaration, see previous error(s) mailbody:339: [0] {} the SPPI construct/keyword `MAX-ACCESS' may not be used in a MIB Any help on finding out what these errors mean would be highly appreciated. Thanks, Bala ______________________ Bala Pitchandi UTStarcom Inc.

1 0

Re: [libsmi] Unloading modules
by winston 12 Jun '03

12 Jun '03

Thanks for the information. Why do I want to do this is because the MIB filenames are different than their internal module names (I can't change the filenames). And so they are not loaded automatically. I was trying to load each module by their filenames but it crashes at nth module. I think it crashes because I don't load them in the right order - the imported module first, etc. This is why I was trying to get information about imported modules, so I read all imports, unload the module, load the next one, etc. And this way since I have the dependencies I can load them in the right order. soso > > >>>>> winston writes: > > winston> Is it possible to completely unload a module without > winston> unloading the whole library - through smiExit? > > No. > > winston> Also, is it possible to know the names of "imported" modules > winston> in a module without having to load them? > > The parser automatically loads imported modules (which in most cases > is needed unless you have unused imports) so the answer is no. Well, > you can of course load a module by making sure that the library does > not find any modules from which things are imported. The library will > generate a bunch of error messages and I have no clue whether the > internal import data structures will be in a usable state. Even if > this works, I would not recommend to do this. > > /js > > -- > Juergen Schoenwaelder International University Bremen > Phone: +49 421 200 3587 P.O. Box 750 561, 28725 Bremen, Germany > Fax: +49 421 200 3103 <http://www.iu-bremen.de/> > > > ______________________________________________________________________ Do you want a free e-mail for life ? Get it at http://www.email.ro/

2 1

Unloading modules
by winston 12 Jun '03

12 Jun '03

Hello, Is it possible to completely unload a module without unloading the whole library - through smiExit? Also, is it possible to know the names of "imported" modules in a module without having to load them? Thanks in advance, soso ______________________________________________________________________ Do you want a free e-mail for life ? Get it at http://www.email.ro/

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

Libsmi June 2003